Télécharger Imprimer la page

Miele SKRF5 Mode D'emploi page 53

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Fault resolution
Risk of electric shock from mains
voltage.
The mains voltage is applied to the
appliance even if it is switched off.
Before carrying out any
troubleshooting, switch the appli-
ance off at the wall socket and un-
plug it.
Cleaning the pre-filter (Fig. 34 + 35)
The pre-filter is located at the rear of the
dust container.
This should be cleaned if it is obviously
dirty.
 Remove the dust container.
 Release the handle of the pre-filter
and remove the pre-filter.
 Rinse the pre-filter under cold running
water.
Risk of damage caused by incor-
rect cleaning.
The pre-filter can become damaged
and be less effective as a result.
Do not use washing-up liquid or any
pointed or sharp-edged objects to
clean the filter. Dry the pre-filter care-
fully after cleaning.
 Replace the dry pre-filter in the dust
container and lock the handle.
 Replace the dust container in the va-
cuum cleaner.
Cleaning the fine dust filter
manually (Fig. 36–41)
Allow a drying time of 24 hours.
 Remove the dust container.
 Release the fine dust container from
the vacuum cleaner in the direction of
the arrow and remove it.
 Run a little water into the opening at
the top of the fine dust container.
 Gently shake the fine dust container
back and forth.
This will rinse out the dust.
 Shake to empty the water out.
 Turn the upper part in the direction of
the arrow so that the marking is
pointing to the  symbol.
This releases the upper part.
 Carefully lift the fine dust filter up-
wards and out of the fine dust con-
tainer.
 Rinse the outside of the fine dust filter
under cold running water.
Risk of damage caused by incor-
rect cleaning.
The fine dust filter can become dam-
aged and be less effective as a res-
ult.
Do not clean the inside of the fine
dust filter. Do not use washing-up li-
quid or any pointed or sharp-edged
objects to clean the filter. Do not
brush the fine dust filter. After clean-
ing, allow the fine dust filter to dry for
a minimum of 24 hours.
 Clean the fine dust filter container
with water and mild washing-up li-
quid.
 Dry the fine dust filter container thor-
oughly.
en
53

Publicité

loading

Ce manuel est également adapté pour:

Blizzard cx1