Personal Safety - Greencut GS200L Manuel D'utilisation

All information included in this manual is relevant to your own safety and that of your environment. If you have any
questions about the information included in this manual, consult a professional or contact the Authorised Service Centre.
The following information on hazards and precautions includes the most probable situations that may arise during the
use of this machine. Consult all the documentation, packaging and product labels before using it.
If you encounter a situation not described in this manual use common sense to use the machine as safely as possible
and, if you see danger, do not use the machine.
USERS
• This machine has been designed to be manipulated only by users of legal age who have read and understood these
instructions. Do not allow people who may not understand these instructions or under age to use this machine.
• Familiarize yourself with this machine before using it. Make sure you know the controls and safety devices and
how they should be used.
• If you are an inexperienced user, we recommend that you do some practice doing simple jobs and, if possible, in
the company of an experienced person.

PERSONAL SAFETY

• Be alert, watch what you are doing and use common sense when operating this machine. Never use the machine
with defective guards or without safety devices.
• Do not modify the controls of this machine.
• Do not use this machine if any of its components are damaged.
• Do not use this machine when you are tired or under the influence of drugs, alcohol or medicines.
• Remove all keys or hand tools from the work area before starting this machine. A key or tool that is nearby may
be touched by a moving part of the machine and be projected causing personal injury.
• Avoid unintentional starting of the machine, make sure the machine and power supply switches are in the OFF
position before connecting or moving the product.
• Always ensure that you maintain good balance and are in a safe position. Always maintain proper foot support
and operate the machine only when it is on a fixed, safe and level surface. Slippery or unstable surfaces can cause
a loss of balance or control of the machine.
• Position your body and arm to resist the forces of recoil.
• Keep all parts of your body away from the chain when the machine is running. Before you start the chainsaw,
make sure the chain is not in contact with any object.
• The cutting device on this machine is sharp. Keep all parts of the body away from cutting elements and moving
parts when the machine is running. Before starting the machine, make sure that the cutting element is not in
contact with any object.
• Always hold the saw with your right hand on the rear handle and your left hand on the front handle.
• Do not exceed and do not cut above shoulder height. This helps prevent unintentional contact with the tip and
allows better control of the saw in unexpected situations.
• Do not leave this machine running unattended.
• Do not attempt to remove the cut material from the cutting tool when it is in motion. Be sure the machine is
turned off when cleaning up material residues.
• Never hold the machine by the cutting tool. The cutting tools have sharp edges that can hurt you.
• Always cut at full engine power and keep the speed constant.
WORKWEAR
• Dress appropriately. Do not wear loose clothing or jewellery. Keep your hair and clothes away from moving parts. Use:
- Eye protection (safety glasses / mesh / methacrylate screens).
-
Hearing protection (earmuffs / earplugs).
55
EN