Home Decorators Collection FAWNDALE 72021 Guide D'utilisation Et D'entretien page 11

Assembly - Hanging the Fan (continued)
8
Mounting the fan-motor assembly
(standard mount)
□
Align the locking slots of the canopy (C) with the two
screws (HH) and alignment post (KK) in the mounting
bracket (A).
□
Push up the canopy (C) and turn clockwise until the
alignment post (KK) engage to the round hole and the
screws (HH) engage to the key slots.
□
Firmly tighten the two mounting screws (HH).
□
Install the decorative bottom cover (JJ) by aligning the
cover slots with screws in the bottom of the canopy (C).
Rotate the bottom cover (JJ) clockwise to lock in place.
Assembly - Attaching the Fan Blades
1
Attaching the blades to the blade
brackets
□
Attach a blade (G) to blade bracket (F) by inserting the
screws (DD) into the holes in the blade (G) and through
the blade bracket (F).
□
Tighten each screw securely.
□
Repeat this step for each blade and blade bracket.
2
Fastening the blade assemblies to
the motor
NOTE: Your fan blades are reversible. Select the blade side finish
which best accentuates your decor.
□
Fasten the blade/blade bracket assembly (F) to the fan motor
assembly by inserting the alignment post into the slot on the
bottom of the motor and tightening the pre-installed blade
bracket screws (EE).
□
Repeat this step for the remaining blade assemblies.
KK
11
Please contact 1-800-986-3460 for further assistance.
K
DD
G
F
E
F
EE
HOMEDEPOT.CA
A
HH
C
B
JJ
D
E