Symbols - Homelite UT43160 Manuel D'utilisation

Some of the following symbols may be used on this product. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert Symbol
Read the Operator's
Manual
Wear Eye and Head
Protection
Wet Conditions Alert
Keep Bystanders Away
Gloves
Safety Footwear
Kickback
Risk of Electrocution
Electric Shock
No Hands Symbol
V Volts
A Amperes
Hz Hertz
W Watt
hrs Hours
n o
No Load Speed
Class II Construction
.../min Per Minute

SYMBOLS

NAME
Page 6 — English
EXPLANATION
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and
understand operator's manual before using this
product.
Always wear eye protection with side shields
marked to comply with ANSI Z87.1, along with
head protection.
Do not expose to rain or use in damp locations.
Keep all bystanders at least 50 ft. away.
Wear non-slip, heavy-duty protective gloves when
handling the pole saw and the blade.
Wear non-slip safety footwear when using this
equipment.
DANGER! Beware of kickback.
DANGER! Risk of electrocution!
Failure to use in dry conditions and to observe safe
practices can result in electric shock.
Failure to keep your hands away from the blade will
result in serious personal injury.
Voltage
Current
Frequency (cycles per second)
Power
Time
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc.,
per minute