Miele Blizzard CX1 Red EcoLine Mode D'emploi page 47

Setting down, transportation
and storage
Park System for pauses during
vacuuming (Fig. 23)
The Park System allows you to conveni-
ently park the suction tube and floor-
head during pauses.
 Slot the floorhead or floorbrush into
the parking attachment on the va-
cuum cleaner.
If your vacuum cleaner is on a slop-
ing surface, e.g. a ramp, retract the
telescopic tube fully.
Park system for storage (Fig. 24)

Always disconnect the vacuum
cleaner from the power supply when
you have finished using it. Switch off
at the wall socket and remove the
plug.
 Stand the vacuum cleaner upright.
 Retract the telescopic tube fully.
 Slot the floorhead downwards into
the parking attachment on the va-
cuum cleaner.
This makes the vacuum cleaner easier
to carry or store.

For safety reasons, do not lift the
vacuum cleaner by the dust con-
tainer carrying handle.
Maintenance

Always disconnect the vacuum
cleaner from the power supply for
maintenance work and for cleaning.
Switch off at the wall socket and un-
plug it.
Emptying the dust
container (Fig. 25-30)
 Empty the dust container before the
dust has reached the max marking
on the dust container.
 Pull the dust container handle up-
wards.
 Lift the dust container upwards to re-
move it.
The contents of the container can be
disposed of with normal domestic
waste, providing they consist of gen-
eral household dust only.
 Hold the dust container close to the
bin to prevent dust from billowing out.
 Press the yellow release catch on the
bottom of the dust container.
The cover will open and the dust will fall
out.
 Close the cover making sure it clicks
into place.
 Insert the dust container into the va-
cuum cleaner from above so that it
audibly clicks into place.
 Push the handle down.
Cleaning the dust container
Clean the dust container as required.
en
47