Publicité
Les langues disponibles
Les langues disponibles
Illustrations
The illustrations referred to in the text
are shown on the fold-out pages at
the end of these operating instruc-
tions.
Connection
Attaching the suction hose
(Fig. 01 + 02)
Insert the hose connector into the
suction opening on the vacuum
cleaner until it clicks into position. To
do this, line up the guides on the two
pieces.
If you want to separate the pieces
again, press the release catches at
the side of the hose connector, and
pull the hose out of the suction open-
ing.
Connecting the suction hose to the
handle (Fig. 03)
Insert the suction hose into the
handle until it clicks into position.
Connecting the handle to the suction
tube (Fig. 04)
Insert the handle into the suction tube
until it clicks into position. To do this,
line up the guides on the two pieces.
To detach the handle from the suction
tube, press the release catch and pull
the handle out of the suction tube,
twisting it slightly as you do so.
Connecting the telescopic tube to
the floorhead (Fig. 05)
Push the telescopic tube into the
floorhead and turn it clockwise or
anti-clockwise until it clicks into posi-
tion.
To detach the floorhead from the suc-
tion tube press the release button
and pull the suction tube away from
the floorhead, twisting it slightly as
you do so.
Using the accessories supplied
(Fig. 06)
Crevice nozzle
For cleaning in folds, crevices or
corners.
Upholstery nozzle
For cleaning upholstery, mat-
tresses, cushions, curtains, covers
etc.
Dusting brush/Dusting brush
with natural bristles, supplied
loose
(depending on model)
(only available in selected coun-
tries)
For cleaning skirting boards, or-
nate and carved objects. The head
can be swivelled to adjust the
angle.
The crevice nozzle and the upholstery
nozzle are located in holders at the rear
of the vacuum cleaner.
Certain models are supplied as stand-
ard with a turbobrush which is not illus-
trated. The turbobrush is supplied with
its own set of operating instructions.
en
43
Publicité
