Worx Nitro Sonicrafter WX693 Mode D'emploi page 8

COMPONENT LIST
HYPERLOCK™ ACCESSORY CLAMPING
1.
LEVER
2. ON/OFF SWITCH
3. VARIABLE SPEED DIAL
4. VENTING SLOTS
UNIVERSAL-FIT™ ACCESSORY
5.
INTERFACE
SMALLER FLANGE (FOR OTHER BRANDS'
6.
SANDING
7. FLANGE
* Works with other oscillating tool brands' accessories.
The following compatible brands are trademarks
owned by third parties which may be registered by their
respective owners: Black & Decker
Electric , Craftsman
®
Mastercraft , Milwaukee
®
Ridgid , Ryobi , Skil
® ® ®
Not all the accessories illustrated or described are
included in standard delivery.
TECHNICAL DATA
8
Type WX693 WX693.X (6-designation of machinery,
representative of high frequency oscillation tool)
Voltage
Oscillations speed
Oscillation angle
Machine weight
(bare tool)
** Voltage measured without workload. Initial battery
voltage reaches Maximum of 20 volts. Nominal voltage
is 18 volts.
*** X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models.
Oscillating Tool
*
, Bosch , Chicago
® ®
, Dremel , Fein , Genesis
® ® ® ®
, Performax , Porter Cable
® ®
, and Tool Shop .
®
WX693 WX693.X ***
20V Max**
8000-18000 /min
4°
1.0kg
SUGGESTED BATTERIES
AND CHARGERS
Category
20V Battery
20V Charger
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
, Makita ,
®
,
®
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
K &K
pA wA
Wear ear protection
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN 62841:
Typical weighted
vibration
The declared vibration total value and the declared noise
emission value have been measured in accordance with
a standard test method and may be used for comparing
one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a preliminary
assessment of exposure.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ
from the declared value depending on the ways in which
the tool is used especially what kind of workpiece is
processed dependant on the following examples and
other variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
Model Capacity
WA3550 1.5Ah
WA3550.1 1.5Ah
WA3551 2.0Ah
WA3551.1 2.0Ah
WA3553 4.0Ah
WA3860 2.0A
WA3880 2.0A
L : 84.9dB(A)
pA
L : 95.9dB(A)
wA
3.0dB(A)
Vibration emission value
ah = 3.910m/s
2
Uncertainty K = 1.5m/s²
EN