Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
INSTRUCTIONS & PARTS LIST FOR STP10 SERIES TAPPERS
Read and understand these instructions before operating this tool.
Everyone using, maintaining, changing accessories or working near this tool must read, understand and follow these Safety Instructions!
Tappers can cause flying particles.
Proper eye protection must be worn at all times by tool user and bystanders.
Flying particles can cause eye injury.
Power tools generate noise.
Ear protection must be worn when tool noise level exceeds 85 dBA. We also recommend that ear protection be worn when the
tool noise level is below 85 dBA. See the tool's information sheet for the noise level.
Prolonged exposure to noise can cause hearing loss.
Power tools vibrate.
Excessive vibration can cause injury. If numbness, tingling, pain or whitening of the skin occurs, stop using tool and consult a
physician. See the tool's information sheet for the vibration level.
Prolonged exposure to vibration can cause injury.
Tappers present a risk of entanglement.
Keep loose hair away from power tools and accessories. Keep hands away from moving parts of the tool and accessories.
Do not wear jewelry, loose clothing, or neckwear around power tools. Keep work area clear of cleaning rags and all items that
could become entangled with the tool.
Entanglements can cause injuries.
This tool is not insulated for contact with electric power sources.
Do not use near live electric circuits. When drilling into walls, be aware that they may have hidden electric wires.
Electric shock can cause injury.
This tool is not intended for use in a flammable or explosive atmosphere.
Do not use this tool in a flammable or explosive atmosphere.
Explosions and fire can cause injury.
When using a tapper, sudden and unexpected tool movement can occur:
• If the tool stalls because of being pushed too hard.
• If the tap snags on the material being drilled.
Be sure your body position allows you to have control of the tool at all times. Make sure your footing is secure.
Sudden and unexpected tool movement can cause injury.
Using excessive force on a tool makes it hard to control.
Do not force tool.
Hard to control tool can cause injury.
Taping or wiring the throttle valve in the "ON" position will prevent the tool from shutting off if the tool should jam or malfunction or if
anything unexpected happens.
Do not wire or tape down the "On-Off" valve of any power tool.
Tools that are prevented from shutting off can cause injury.
Poorly maintained and lubricated tools can fail unexpectedly.
Keep tool properly lubricated and in good repair at all times. Use only Sioux Air Motor Oil No. 288. See the tool's information
sheet to find out what other greases and oils to use. Do not drop the end of the hose on the floor where it will pick up dirt and
transport it into the tool. See information sheet for any additional maintenance requirements.
Unexpected tool failures can cause injury.
Air hoses can come loose from power tools and whip.
Inspect and do not use tools with loose or damaged air hoses or fittings.
Whipping air hoses can cause injury.
Air hoses that are not oil resistant or are not rated for the working pressure can burst.
Make sure that all air hoses are oil resistant and rated for the working pressure.
Air hoses that burst can cause injury.
Tools not operated at proper air pressure can operate erratically.
Do not exceed a maximum air pressure of 90 psig/6.2 bar or as stated on the tool's nameplate or operating instructions. Use an
air regulator to maintain proper air pressure.
Erratic operation in power tools can cause injury.
250 Snap-on Drive • PO Box 1596 • Murphy, NC 28906 • USA • Phone: 828-835-9765 •www.siouxtools.com
Form ZCE781
SERIAL"A"
SAVE THESE INSTRUCTIONS!
WARNING
When used improperly power tools can create hazardous situations.
Improperly used power tools can cause injury or death.
TAPPER SAFETY
1
Original
Instructions
Form ZCE781
Date 2013February1/E
Page 1 of 24
2013February1/E
Date
Publicité
Manuels Connexes pour SIOUX STP10 Serie
Sommaire des Matières pour SIOUX STP10 Serie
- Page 1 Poorly maintained and lubricated tools can fail unexpectedly. Keep tool properly lubricated and in good repair at all times. Use only Sioux Air Motor Oil No. 288. See the tool’s information sheet to find out what other greases and oils to use. Do not drop the end of the hose on the floor where it will pick up dirt and transport it into the tool.
- Page 2 (10mm) I.D. LUBRICATION For maximum performance and tool life, an air line lubricator, set to deliver 2 drops per minute, is recommended. SIOUX No. 288 Air Motor Oil is recommended. If an airline lubrication is not used, it is recommended that the tool be oiled daily before use to improve performance. Add 2-4 drops of air motor oil and run the tool for 10-20 seconds to distribute oil through the tool.
- Page 3 *per ISO 8662 DECLARATION OF CONFORMITY We, Sioux Tools Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the products STP10 SERIES to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:...
- Page 4 Schlecht gewartete und geschmierte Werkzeuge können plötzlich versagen. Schmieren Sie das Werkzeug regelmäßig und reparieren Sie es, wenn notwendig. Benutzen Sie ausschließlich Sioux Motoröl Nr. 288. Auf dem Informationsblatt für das Werkzeug finden Sie weitere Informationen über zu verwendende Schmiermittel und Öle.
- Page 5 Sorgen Sie dafür, daß der Einschalter auf “Aus” steht, bevor Sie die Druckluft anschließen. Unerwartete Starts können zu Verletzungen führen Der Gebrauch von Zubehör, das nicht von Sioux Tools geliefert oder spezifiziert wurde, kann zu unvorhersehbaren Zwischenfällen führen. Verwenden Sie ausschließlich von Sioux Tools geliefertes oder empfohlenes Zubehör.
- Page 6 *per ISO 8662 KONFORMITÄTSERKLÄRUNG Wir, Sioux Tools, Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, erklären hiermit alleinverantwortlich, daß die Produkte STP10 SERIE auf die sich diese Erklärung bezieht, mit den Anforderungen der folgenden Standards oder Normen oder Dokumenten übereinstimmen: EN 792, ISO 12100-1, ISO 12100-2, ISO 8662, Pneurop PN8NTC1 gemäß...
- Page 7 Siempre mantenga la herramienta lubricada correctamente y en buen estado. Utilice solamente aceite para motores neumáticos de Sioux No. 288. Ver la hoja de información de la herramienta para saber tener información sobre otros aceites o grasas que puede utilizar. No deje caer el extremo de la manguera en el suelo donde puede ensuciarse y transportar la suciedad a la herramienta.
- Page 8 Asegúrese que el accionador está en “off” (apagado) antes de conectar el aire. Los arranques inesperados pueden producir lesiones. El uso de cualquier accesorio con esta herramienta que no sea proporcionado o especificado por Sioux Tools puede tener un rendimiento impredecible.
- Page 9 *según PN8NTC1 *según ISO 8662 DECLARACION DE CONFORMIDAD Nosotros, Sioux Tools, Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declaramos bajo nuestra única responsabilidad que los productos STP10 SERIES con los cuales se relaciona esta declaración están en conformidad con las siguiente(s) norma(s) u otro(s) documento(s) normativo(s):...
- Page 10 L’insufficiente manutenzione e lubrificazione degli strumenti può provocare guasti improvvisi. Mantenere sempre lo strumento adeguatamente lubrificato ed in buono stato. Utilizzare solo olio motore Sioux Air n. 288. Consultare il foglio informativo dell’utensile per determinare quali altri grassi ed oli utilizzare. Non lasciar cadere l’estremità...
- Page 11 Accertarsi che il dispositivo di azionamento sia disattivato prima di collegare l’aria. Un avvio imprevisto può provocare lesioni. L’utilizzo, con questo strumento, di accessori non forniti o specificati da Sioux Tools può portare a risultati imprevedibili. Utilizzare solo accessori forniti o specificati da Sioux Tools.
- Page 12 *secondo PN8NTC1 *secondo ISO 8662 CERTIFICAZIONE DI CONFORMITA La Sioux Tools, Inc, con sede al 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, solennemente dichiara sotto la propria e sola responsabilità che i prodotti STP10 SERIE sono conformi alle seguenti normative, standard o certificazioni:...
- Page 13 Vous assurer de lubrifier l’outil comme il se doit et le maintenir en bon état de fonctionnement. Utiliser seulement l’huile de moteur pneumatique Sioux Air Motor Oil No. 288. Consulter la fiche technique de l’outil pour connaître les autres huiles et lubrifiants recommandés.
- Page 14 En l’absence de lubrificateur, il est conseillé de lubrifier l’outil quotidiennement avant son utilisation pour améliorer sa performance. Ajouter 2 à 4 a goutte d’huile pour moteur pneumatique et faire tourner l’outil pendant 10 à 20 secondes pour diffuser l’huile dans l’outil. Lubrifier les pignons par le bouchon de graissage avec de la graisse Sioux 1232A après 100 heures de fonctionnement. MAINTENANCE L’eau, la poussière et d’autres impuretés dans la ligne d’air peuvent causer de la corrosion et gripper les palettes.
- Page 15 ISO 8662 DÉCLARATION DE CONFORMITÉ La société Sioux Tools, Inc., située à : 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, affirme que les produits STP10 SERIE dont cette fiche fait l’objet, sont conformes aux normes, documents normatifs et autres références :...
- Page 16 Slecht onderhouden en slecht geölied gereedschap kan leiden tot plotselinge storingen. Zorg steeds dat de boor goed geölied en in goede conditie is. Gebruik alleen Sioux Air Motor Oil No. 288. Zie specificaties over het gebruik van andere oliën en vetten. Laat het uiteinde van de buis niet op de grond vallen, zodat stof en verontreinigende deeltjes de boor niet kunnen bereiken.
- Page 17 Zorg dat de aan/uit knop uitstaat, alvorens de luchttoevoer aan te sluiten. Onverwacht startende slijpmachines kunnen letsel veroorzaken. Het gebruik van een niet door Sioux Tools geleverd of gespecificeerd onderdeel of accessoire kan onverwachte gevolgen hebben. Gebruik alleen door Sioux Tools geleverde of gespecificeerde onderdelen en accessoires.
- Page 18 *conform PN8NTC1 *conform ISO 8662 CONFORMITEITSVERKLARING Ondergetekende, Sioux Tools, Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, verklaart met inachtneming van de eigen aansprakelijkheid desbetreffend, dat de produkten STP10 SERIE waarop deze verklaring van toepassing is, conform zijn met de hierna genoemde norm, normen en/of andere regels en voorschriften:...
- Page 19 Illa skötta och dåligt smorda verktyg kan oförutsett sluta att fungera. Håll alltid verktyget väl smort och i god funktion. Använd enbart Sioux Air Motor Oil Nr. 288. Uppgifter om andra smörjämnen och oljor som ska användas finns i informationsbladet för verktyget. Släpp inte ned änden på slangen på golvet där den kan plocka upp smuts som kan komma in i verktyget.
- Page 20 Se till att manövreringsorganet är av innan du kopplar in luft. Oförutsedd start kan förorsaka kroppsskada. Om du använder tillbehör med detta verktyg som ej tillhandahålls eller specificeras av Sioux Tools kan dessa fungera oberäkneligt. Använd endast tillbehör som tillhandahålls eller specificeras av Sioux Tools.
- Page 21 *enligt ISO 8662 FÖRSÄKRAN OM ÖVERENSSTÄMMELSE Vi, Sioux Tools, Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, förklarar under eget ansvar att produkterna STP10 SERIES som denna försäkran gäller uppfyller följande standard eller standarder eller andra normgivande dokument:...
- Page 22 INSTRUCTIONS & PARTS LIST FOR STP10P SERIES TAPPERS SERIAL“A” Fig. Part Fig. Part Description Description SDR-43 Gear Case Cap SDR-84 Reversing Spring SDR-66A Tapper Gear Carrier (Includes 21094 Tap Chuck SDR-83 Reverse Valve Spool and 10265 Ball Bearing) SDR-88 Top Reverse Button SDR-66LC Tapper Gear Carrier Less Chuck SDR-85 Top Reverse Nut (Includes 10265 Ball Bearing)
- Page 23 INSTRUCTIONS & PARTS LIST FOR STP10S SERIES STRAIGHT TAPPERS SERIAL“A” *Order Quantity As Required FURNISH CATALOG, SERIAL, AND MODEL NUMBER WHEN ORDERING PARTS Fig. Part Description 10220 Ball Bearing SDR-80 Front End Plate SP74130 Cylinder, Reversing SDR-7 Rotor (7 tooth)(300, 700 & 1200 RPM) SDR-8 Rotor (10 tooth)(500 RPM) SP74048 Vane Set SDR-11 Rear End Plate...
- Page 24 WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. WARNUNG Der durch Elektrosanden, -sägen, -schleifen und -bohren sowie durch andere Bauarbeiten anfallende Staub enthält Chemikalien, die nachweislich Krebs sowie Geburts- bzw.
- Page 25 This pdf incorporates the following model numbers: STP10P3C, STP10P3C20, STP10P3C32, STP10S12B12, STP10S3B12, STP10S5B12, STP10S7B12...