Pioneer MVH-S610BT Mode D'emploi page 7

Radio
The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the
Middle East, Africa and Oceania. Use in other areas may result in poor reception. The RDS
(radio data system) function only works in areas that broadcast RDS signals for FM
stations.
Receiving preset stations
1
Press SRC/OFF to select [RADIO].
2
Press BAND/
3
Press a number button (1/
NOTE
You can select a preset channel by pressing
TIP
The / buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the
FUNCTION settings (page 24).
Best stations memory (BSM)
The six strongest stations are stored on the number buttons (1/
1
After selecting the band, press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select [FUNCTION], then press to confirm.
3
Turn the M.C. dial to select [BSM], then press to confirm.
To seek a station manually
1
After selecting the band, press
Press and hold
when the unit receives a station. To cancel seek tuning, press
NOTE
[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 24).
To store stations manually
1
While receiving the station you want to store, press and hold one of the number
buttons (1/ to 6/
to select the band from [FM1], [FM2], [FM3], [MW] or [LW].
to 6/
and turning the M.C. dial.
/
/ then release to seek an available station. Scanning stops
) until it stops flashing.
).
to select a station.
- 7 - - 7 -
to 6/ ).
/ .