Télécharger Imprimer la page

Ninja BN650 Instructions page 22

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34
USING THE FOOD PROCESSOR BOWL - CON'T
6a Plug in the unit, then press the Power
button to turn it on . If using an
Auto-iQ® program, fi rst select the
program that best suits your recipe .
The preset feature will automatically
stop the unit at the end of the program .
To stop the unit at any time, press the
currently active program again .
6b If not using an Auto-iQ® program, select
one of the manual programs . Once the
ingredients have reached your desired
consistency, press the active button
again, and wait for the unit to come to a
complete stop .
7 When fi nished, press the button on the
feed chute lid near the handle to unlock,
then turn the lid anti-clockwise . Lift
the lid from the bowl . Always remove
the Chopping Blade Assembly before
emptying the ingredients from the
bowl . To remove the Chopping Blade
Assembly, carefully grasp it by the top
of the shaft and lift it out of the bowl .
42
ninjakitchen.eu
8
To remove the bowl from the motor
base, turn the bowl anti-clockwise and
then lift it .
9
Press the Power button to turn the unit
off , then unplug the unit . Refer to the
Care & Maintenance section for cleaning
and storage instructions .
USING THE SLICING/GRATING DISC
IMPORTANT: Review all warnings on
pages 36-38 before proceeding.
IMPORTANT: Use the SLICE or LOW
setting when using the Slicing/
Grating Disc.
NOTE: The feed chute lid features
a pusher to guide food through the
chute .
NOTE: The Slicing/Grating Disc
is reversible . Use the side labeled
"Slicer" for slicing . Carefully fl ip
the disc over to the side labeled
"Shredder" for grating .
1 Place motor base and place on a clean,
dry, level surface such as a worktop
or table .
2 Lower the Food Processor Bowl onto
the motor base and rotate clockwise
until it clicks into place .
3 Place the disc spindle onto the drive
gear inside the bowl .
4 Use the fi nger holes to grasp the disc and
place it over the spindle .
5 Place the feed chute lid on the bowl and
turn clockwise until you hear a click,
indicating the lid is locked in place .
ninjakitchen.eu
43

Publicité

loading

Ce manuel est également adapté pour:

Bn650eu