Publicité
Les langues disponibles
Les langues disponibles
In case of improper installation, the device can be dangerous and cause injury. Before installation, check
EN
the power system data. Connect the device only when there is compliance. The unit should be unpacked
and checked fully before connecting by a professional.
5.2 Use
WARNING
The establishment of the installation of the device and maintenance must be performed only by professionals.
• Do not leave the unit without monitor.
• During use, your hands should be dry.
• Do not move or tilt the device during operation.
MANUAL
COMMISSIONING
The unit must be completely removed from its packaging. All guards must be fully
withdrawn.
Place on a solid, flat surface.
Do not install this device near open fires or other heating appliances.
The product is ready for use.
USE
Pour the liquid into the tank.
Connect the device and press the switch.
Turn the thermostat in the direction of the hand of a clock to the desired setting.
The temperature may be between 45 ° and 90 ° C.
As the temperature decreases, the device starts to heat up.
At the end of use, press the switch and unplugging.
NOTE
The device has a security system in case of overheating. Upon activation, disconnect the device and allow it
to cool. If this protection system will start regularly, it is imperative to contact your dealer.
After automatic shutdown, the unit may be commissioned only by pressing the reset button on the unit's back
for this, wait until the temperature drops, press the Reset button.
Publicité
