Publicité
Les langues disponibles
Les langues disponibles
Safety switch off function:
Every cooking zone will be switched
off after a defined maximum operation
time if the heat setting is not modified.
Every change in the cooking zone puts
the maximum operation time back to
the initial value of the operating time
limitation. The maximum operation time
depends on the selected temperature
level.
Wait until the 'F' disappears for all
zones,turn the hob on by touching
and continue to use.
Heat setting
1 - 2
3 - 4
5
6 - 9
Child Lock:
The child lock function can be activated
after switching the control on. To
activate the child lock, simultaneously
press the right and the left side of the
slider button and then operate the
right side of the slider button again.
"L" meaning LOCKED will appear in
all heater displays and the control can
not be changed. (If a cooking zone is
in the hot condition, "L" and "H" will be
displayed in alternation.)
The hob will remain in a locked
condition until it gets unlocked, even if
the control has been switched on and
off.
To deactivate the child lock, first switch
Safety switch
off after
6 Hours
5 Hours
4 Hours
1,5 Hours
the hob on. Simultaneously press the
right and the left of the slider button
and then press left of slider button
again. The "L" will disappear in the
display and the hob will be switched
off.
Key Lock
The key lock functionality is for
blocking and setting the appliance
into safe mode during operation..
Touch modifications as, for example,
increasing heat settings and others
should not be possible. Only switching
the appliance off is possible.
The lock function becomes active if
the Key Lock button
for at least 2 seconds. This operation
is acknowledged by a buzzer. After
a successful operation of more than
2 seconds, the Key Lock Indicator
flashes and the heater becomes
locked.
Timer function :
The timer function is carried out in two
versions:
Minute minder timer (1 to 99
minutes):
The minute minder timer can be
operated if the cooking zones are
switched off. The timer display displays
"00" with a blinking dot.
Use the Timer Sliding Buttons
the time. Adjustment range is
between 0 and 99 minutes. If there
EN- 10
is pressed
to increase/decrease
Publicité
