SW-Motech KFT.22.995.65100/B Instructions De Montage page 58

5
Screw the license plate, the license plate holder and the crossbar (*) included
with the SW-MOTECH side carrier to the parts shown on the adapter plate (1).
 WARNING: Use liquid thread locker (only screw (4))!
Tighten the screw (4) according to the manufacturer's instructions.
Tighten the screws (5) and (6) as specified in the mounting instructions.
The content translation is automated.
© SW-MOTECH GmbH & Co. KG
MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS!
8
2
5
×
9 Nm
2
6
×
7 Nm
8
7
×
1
8
×
4
9
×
Errors and omissions excepted
Subject to technical and design changes.