LENCO LPJ-500BU Mode D'emploi page 8

Ceiling mounting front:
Select this location
mounted upside down at the ceiling in front of
the screen.
NOTE: A projector mount is required to mount
the projector on the ceiling.
Table mounting rear:
Select this location if you want to place the
projector at the rear of the screen.
NOTE: That a special rear projection screen is
required.
Ceiling mounting rear:
Select this location
mounted upside down at the ceiling at the rear
of the screen.
NOTE: That a projector mount and a rear
projection screen is required to mount the
projector on the ceiling.
To Reduce Image Distortion
It is recommended to move the projector as close to
center of screen.
Distance Between The Projector And Screen
Measure the distance between the projector and where you want to position the
screen. This is the projection distance and the screen diagonal indicated in cm.
when the projector is
when the projector is
6
FRONT CEILING
REAR TABLE
REAR CEILING
Square/Rectangle
Screen
Projector