Publicité
Les langues disponibles
Les langues disponibles
After initial pairing, the projector and the Bluetooth speakers will stay paired
unless unpaired manually by the user, or erased due to a reset of either device. If
this occurs or you find either unit is unable to connect, repeat the above steps.
Note: If external devices are connected with a VGA cable,
transmitted (no sound). The Bluetooth option can't be used in vga mode.
"This product has a bluetooth transmission function, you can not receive any
bluetooth sound on it: this means that you can transmit wirelessly a bluetooth
sound signal to an external device like a bluetooth speaker, bluetooth headphone,
audio system with bluetooth reception,..."
OSD Language
Bluetooth
Restore Factory Default
Panel Rotate
Info
Warning about sound delay during Bluetooth transmission
It could be that you experience a slight delay between the image of a movie and
the sound you transmit.
This is due to different Bluetooth chipsets used in the LCD projector and your
audio device (speaker or headphone).
You can try to stop and reconnect the audio device a few times, but if the
problem is not solved you better connect the external speaker or headphone by
cable through the earphone jack (14)
Using Projector Menu 1.0
Press
button to enter projector menu. Press again to previous status.
Picture Mode
Contrast
Brightness
Color
Sharpness
Tint
Color Temperature
Aspect Ratio
Noise Reduction
Screen
1.
Picture Mode
Select Vivid, User (custom), Soft, or Standard
2.
Contrast, Brightness, etc
Set Picture Mode to "User" to adjust these settings. Tint can only be adjusted in
AV and NTSC IN
3.
Color Temperature
Select Warm, Cool, or Medium.
English
0
Standard
50
Use
50
The selected item is displayed in the
50
upper right of the screen.
50
50
Medium
Auto
Middle
20
only video image is
buttons to select an item.
Publicité
