LENCO LPJ-500BU Mode D'emploi page 25

DVD SETUP
General Setup:
TV Display:
This allows you to set the picture format when you play a DVD.
4:3 Panscan - a 4:3 aspect ratio that will trim the left and right sides off of a
widescreen film. Also known as fullscreen.
4:3 Letterbox - select this if you have a DVD movie with 4:3 aspect ratio. The full
image will be shown on the screen with black letterbox bars on the upper and
lower portions of the image.
16:9 - Select this format if you want to play a wide screen DVD, the format is
indicated as 16: 9.
Angle Mark: Displays current camera viewing information on the right hand
corner of the screen if available on the disc. Note that this function only works
with those discs encoded with multiple camera angles.
OSD Language: Change the DVD player system language
Screen Saver: Use this setting to turn the screen saver on or off after a period of
prolonged DVD player inactivity.
Last Memory: Set this to ON so that, each time you turn off the unit or stop the
disc, the last point of play will be retained. On the next time you turn on the unit
and play the same disc, the unit will play from that point.
23