MZ electronic HC600 Instructions D'utilisation page 14

Technical data:
•
Supply voltage: 30 VCC max / 24Vac max
•
Normally open contacts.
•
Don't use with a load more than 2 Amps.
•
Cable can be extended up to 4 mt.
•
Ergonomic case moulded in self-extinguishing polyester resin.
•
Watertight protection: IP 67:
•
Remote control dimensions: 170 x 80 x 50 mm.
WARNING
General notes
Any tampering with the instrument will result in immediate voiding of the warranty
Installation
WARNING
ALWAYS DISCONNECT THE BATTERY BEFORE INSTALLING
If possible mount the socket in a dry place using the template below.
Make the electrical connections according to the wiring diagram.
HC600
USE ONLY ON DIRECT CURRENT.
MUST BE USED WITH CONTACTORS OR A CONTROL BOX..
14
English
Rev. 02-2022