Unique Classic UGP-24CR RH W Guide De L'utilisateur page 37
Masquer les pouces
Voir aussi pour Classic UGP-24CR RH W:
- Guide de l'utilisateur (56 pages) ,
- Manuel d'utilisation (28 pages) ,
- Guide d'installation (28 pages)
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION PROCEDURE
TIGHTEN
TO WALL
SECOND
THESE STEPS REQUIRE LIFTING AND HANGING AT THE SAME
TIME - USE TWO/THREE PEOPLE
6. Locate the top (cabinet) holes and line up hood holes, while also
lining up to holes with the protruding wall screws.
7. Fasten the hood to the bottom of the cabinet by tightening
screws with a drill or screwdriver.
8. Tighten the screws to fix the hood to the wall once it is fixed to
the cabinet.
9. Run the ducting through cabinet and the electrical cables through
electrical access hole.
TIGHTEN
TOP FIRST
13
Publicité
