Unique Classic UGP-24CR RH W Guide De L'utilisateur page 32

DUCT PLANNING
•
The ventilation hood is equipped for 8" round ducts. This hood can
be ventilated vertically through the top cabinet or ceiling. A duct
transition piece is provided for vertical exhaust. You can use elbows
(sold separately) to ventilate horizontally through the rear wall.
•
Determine the exact position of the hood.
•
Plan the route to vent the ventilation duct to the outside.
•
Use the shortest and straightest path possible. For satisfactory
performance, the length of the duct should not exceed 12.5 feet of
equivalent length for all duct configurations.
•
Use only metal ducts.
WALL FRAMING FOR ADEQUATE SUPPORT
WARNING
THESE VENT HOODS ARE HEAVY. ADEQUATE STRUCTURAL
SUPPORT IS REQUIRED.
Marker or
pencil
Level
Utility knife
8
PRE INSTALLATION
NECESSARY TOOLS
Safety
Gloves
Stud finder
Aluminum
Foil Tape
Powered
screwdriver or
drill
Measuring Hammer
tape
Flat-blade
and Phillips
screwdrivers