EUROM Ambiance 1500 Manuel D'utilisation page 22


By slightly loosening the lower wing nut, the horizontal angle of the infrared heater
can be adjusted (see illustrations). After setting the desired angle, tighten the
wing nut again.

Fasten all screws another time firmly and scheck or the heater is firmly mounted.
Now your infra red heater is ready for use.

For personal protection the installation, to which the Eurom Ambiance is
connected, has to be equipped with an earth fall device (max. 30 mAmp).
Under some circumstances it may be attractive to make a fast connection between
the heater and the main supply, and to operate the heater with a switch. Because
the Eurom Ambiance has a high water tightness (IP65) and for safety reasons, such
a connection has to be made by a qualified electrician.
22