Whirlpool CHW8990CW Instructions D'installation page 11

CODE
6 07 REGULAR CYCLE PRICE (Factory Default)
6 07 Represents the number of quarters (coin 1); may
adjust from 0–39. (See VALUE OF COIN 1.) Advance
from 0–39 by pressing the HOT button. Factory
default of 7 quarters = $1.75.
Press the WARM button once to advance
g
to next code.
7 11 WASH LENGTH
7 11 This is the number of minutes for WASH. Washer
comes from the factory preset with 11 minutes.
Choose from 9–17 minutes by pressing the HOT
button.
g Press the WARM button once to advance
to next code.
ADDITIONAL RINSE OPTION
8 00
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
8 00 Not Selected 'OFF'.
8 Ar Selected 'ON'.
Press the COLD button once for this selection.
g Press the WARM button once to advance
to next code.
CYCLE COUNTER OPTION
9 00
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
9 00 Not Selected 'OFF'.
9 0C Selected 'ON' and not able to be deselected.
Press the COLD button 3 consecutive times to select
'ON'. Once selected 'ON' it cannot be deselected.
g Press the WARM button once to advance
to next code.
MONEY COUNTER OPTION
1. 00
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
1. 00 Not Selected 'OFF'.
1. 0C Selected 'ON'.
Press the COLD button 3 consecutive times to
select 'ON' and 3 consecutive times to remove
(Not Selected 'OFF'.) Counter resets by going
from 'OFF' to 'ON'.
1 C0 Selected 'ON' and not able to be deselected.
To select 'ON' and not able to be deselected,
first select 'ON', then within 2 seconds, press
the COLD twice, HOT once, and exit the set-up
mode.
g Press the WARM button once to advance
to next code.
SPECIAL PRICING OPTIONS
2. 00
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
2. 00 Not Selected 'OFF', and next available code will be
A.00.
2. SP Selected 'ON'. Press the COLD button once for this
selection.
All manuals and user guides at all-guides.com
EXPLANATION
CODE
If SPECIAL PRICING OPTION is selected, there is access
to codes '3.XX' through '9.XX'.
g Press the WARM button once to advance
to next code.
Options to use if SPECIAL PRICING is selected:
3. 07 SPECIAL CYCLE PRICE
3. 07 Represents the number of quarters (coin 1);
may adjust from 0–39. (See VALUE OF COIN 1.)
Advance from 0–39 by pressing the HOT button.
Factory default of 7 quarters = $1.75.
g Press the WARM button once to advance
to next code.
5. 00 TIME-OF-DAY CLOCK, MINUTES
5. 00 This is the TIME-OF-DAY CLOCK, minute setting;
select 0–59 minutes by pressing the HOT button.
Press the WARM button once to advance
g
to next code.
6. 00 TIME-OF-DAY CLOCK, HOURS
NOTE: Uses MILITARY TIME or 24 hr. clock.
6. 00 This is the TIME-OF-DAY CLOCK, hour setting;
select 0–23 hours by pressing the HOT button.
g Press the WARM button once to advance
to next code.
SPECIAL PRICE START HOUR
7. 00
NOTE: Uses MILITARY TIME or 24 hr. clock.
7. 00 This is the start hour; 0–23 hours. Select START
HOUR by pressing the HOT button.
g Press the WARM button once to advance
to next code.
SPECIAL PRICE STOP HOUR
8. 00
NOTE: Uses MILITARY TIME or 24 hr. clock.
8. 00 This is the stop hour; 0–23 hours. Select STOP
HOUR by pressing the HOT button.
Press the WARM button once to advance
g
to next code.
9. 10 SPECIAL PRICE DAY
9. 10 This represents the day of the week and whether
special pricing is selected for that day. A number
followed by '0' indicates no selection that particular
day (9.10). A number followed by an 'S' indicates
selected for that day (9.1S). To change the value
of '0' and 'S', use the COLD button.
Days of the week (1–7) are selected by pressing
the HOT button.
When exiting set-up code '9', the display must
show current day of week:
DISPLAY DAY OF WEEK
10 Day 1 = Sunday
20 Day 2 = Monday
30 Day 3 = Tuesday
40 Day 4 = Wednesday
50 Day 5 = Thursday
60 Day 6 = Friday
70 Day 7 = Saturday
g Press the WARM button once to advance
to next code.
EXPLANATION
CODE (selected)
1S
2S
3S
4S
5S
6S
7S
11