ARRI Claypaky Mini Xtylos HPE Mode D'emploi page 6

WARNING: Operators shall control access to the beam within the hazard distance or install the product at the height that will
prevent spectators' eyes from being within the hazard distance.
3
Installing the luminaire - Fig. 3
The luminaire can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall.
WARNING: the luminaire must always be securely mounted and immobilized, also when installed on the floor, in a way that accidental
redirection of the fixture is not occurring.
WARNING: with the exception of when the luminaire is positioned on the floor, the safety cable must be fitted. (Cod. 105041/001 available on request).
This must be securely fixed to the support structure of the luminaire and then connected to the fixing point at the centre of the base.
4
Connecting and disconnecting power cable - Fig. 4
MINI XTYLOS HPE
3. INSTALLATION AND START-UP
3.1 Installing the fixture
3.2 Connecting to mains supply
2
1
2
6
1
3