Chal-tec Nels Pro Manuel D'utilisation page 41

Car seat recline angle adjustment
Reverse angle adjustment
1. Grasp the angle and rotation adjustment handle (11), and then rotate the
seat to the rear of the car, so that the child car seat is in rearward mode,
facing backward.
2. Pull the angle of the seat and rotate the adjusting handle (11) to adjust the
seat to the max.inclined positlon.
Notes
1. When the child seat is installed rearwards: the child seat has one gear.
2. The child seat can be rotated directly when it is in the forward/rearward
position.
Reverse angle adjustment
1. Grasp the angle and rotation adjustment handle (12), then rotate the seat
to the front of the car, so that the child safety seat is in forward mode,
facing forward.
2. Pull the angle adjusting handle (11), to adjust the seat to the most
appropriate angle. There are 5 gears in total.
Notes
1. Forward facing 76-105 cm: position 1
Forward facing 100-150 cm: position 1.
2. The child seat can be rotated directly when it is in the forward/readward
position.
EN
41