Publicité
Les langues disponibles
Les langues disponibles
CrownWall
®
PRO Series Cabinets
ASSEMBLY INSTRUCTIONS
STEP 1: Installation of feet
This step applies to the 2 Door Tall Cabinet, 2 Door Base Cabinet, and the 5 Drawer
Base Cabinet.
1. Empty the cabinet (remove shelf or any other items that may be inside)
2. As a precaution, place cardboard or carpet on the floor.
3. Lay the cabinet upside down or on its back (bottom of the cabinet must be easily
accessible) on the cardboard or carpet.
4. Install the feet as shown below using the supplied hex bolts and washers (4 hex
bolts per foot). Note the orientation of the feet and bolt pattern.
Hex Bolt and Washer
EXAMPLE OF FOOT INSTALLED WITH
SUPPLIED HEX BOLTS AND WASHERS
FRONT OF CABINET
Bottom View
4
Publicité
