CrownWall PRO Serie Instructions D'assemblage page 3

CrownWall
®
PRO Series Cabinets
PLEASE READ THIS INSTRUCTION MANUAL THOROUGHLY BEFORE BEGINNING
ASSEMBLY OF CABINETS
SAFETY INFORMATION
TEAM LIFT – Minimum of 2 individuals should be involved in the assembly of these
cabinets, due to the heavy weight of the cabinets.
Cabinets must be properly secured to wall studs in order to properly hold the
specified weight capacity, to avoid injury or death during the use of these Cabinets.
Hardware for mounting the cabinets to standard surfaces such as walls (wall studs)
are included. It is the responsibility of the end user to properly research the
necessary hardware for mounting the CrownWall
mounting surface, as such mounting surfaces can vary.
Please ensure that any children involved in the installation of the CrownWall ® PRO
series Cabinets are properly supervised.
TOOLS REQUIRED
Measuring Tape
Pencil
Adjustable wrench or pliers
® PRO Series Cabinets to any wall or
Stud Finder
Drill
Ratchet set
1
Level
Star screwdriver