CrownWall PRO Serie Instructions D'assemblage page 10

CrownWall
®
PRO Series Cabinets
STEP 5: Installing The 2 Door Wall Cabinets
THIS STEP REQUIRES TWO INDIVIDUALS TO COMPLETE
1) Using your stud finder, locate all studs that are found in the wall that you will be
installing your cabinets against. Mark these locations with a pencil.
2) Once the studs have been located, using the supplied 3" wood screws and washer,
fasten the wall cabinets into the wall studs through the holes found in the back of the
cabinets.
IF WALL CABINETS ARE BEING INSTALLED IN CONJUNCTION WITH OTHER CABINETS
AS A SET, BE MINDFUL OF THEIR LOCATION RELATIVE TO THE OTHER CABINETS
3) Multiple wall cabinets can be installed beside each other, and fastened together using
the supplied star bolts and nuts through the holes found on the sides of the wall
cabinets. Note, this is in conjunction with each cabinet being mounted to wall studs.
Note:
If you have purchased the
CrownWall
Aluminum Backsplash,
consult the instructions for
installing it at this time
8
PRO Series
®
3" Wood Screw
and Washer