LG LCV800 Manuel Du Propriétaire page 18

Trouble Shooting
Review this chart to find do-it-yourself solutions for minor performance problems.
Any service or repair needed, other than as described in this User's Guide, should be performed through
your local LGE service center.
Electrical shock and personal injury hazard.
Always unplug the vacuum cleaner before servicing. Failure to do so could result in electrical shock or personal
injury.
PROBLEM
Vacuum cleaner will
not run
Poor suction
Switch on, but hose LED is
on and alarm sound
"Dding~, Dding~"
Indicator
Indicator
Switch on, but unit LED is
on and alarm sound
"Dding Dding~, Dding
Dding~"
18
All manuals and user guides at all-guides.com
WARNING
POSSIBLE CAUSE
• Unplugged at wall outlet
• Hose is not connected to the
body properly
• Full or clogged dust tank and
filters
• Dust tank improperly installed
• Clogged hose or wand
• Clogged nozzle
• Full or clogged dust tank and
filters
• Dust tank improperly installed
• Clogged hose or wand
• Clogged nozzle
• Dust tank is full
Indicator
Indicator
• Power is on without dust tank
• Rotating plate in the dust
tank is restricted because of
obstruction
• Dust separator and filters is
full of dust
• Power is on without dust
separator and filters
POSSIBLE SOLUTION
• Make sure cord is plugged into a
functioning outlet.
• Remove the hose from the body and
reconnect it properly. [See page 7]
• Empty dust tank and clean filters.
[See page 12 ~ 16]
• Make sure all dust tank components and
filters are installed correctly.
• Check for clogs. [See page 17]
• Empty dust tank and clean filters.
[See page 12 ~ 16]
• Make sure all dust tank components and
filters are installed correctly.
• Check for clogs. [See page 17]
• Empty dust tank
• Reattach dust tank
• Remove obstruction[See page 12 ~ 13]
• Clean dust separator and filters
• Reattach dust separator and filters