Publicité
Les langues disponibles
Les langues disponibles
Replacing the fuse
If the lamp burns out, the fine-wire fuse of the device might fuse, too. Only replace the fuse by a fuse of
same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Sound-control:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
Fuse:
Accessory:
OMNILUX JCD 240V/100W GX-6.35 1500h 2800K
Please note: Every information is subject to change without prior notice. 11.11.2008 ©
230 V AC, 50 Hz ~
110 W
via built-in microphone
185 x 160 x 170 mm
1.3 kg
:
25° C
a
(steady state):
150° C
C
0.5 m
0.5 m
F 1 A, 250 V
No. 88294905
17/32
00037122.DOC, Version 2.4
Publicité
