Kopp Free-control Mode D'emploi page 40

GB
Other applications
Description
Application
Connectivity
DIP switch
Setting
Pinning diagram
(page 31)
LED signalling
MInstallation possibility
Installation in a flush-mounted box
The universal radio transmitter can be in-
stalled behind a flush-type switch, pushbut-
ton or shutter switch. A flush-mounted box of
at least 60 mm depth must be used.
Installation in a distribution board
In the event of applications outside of a
flush-mounted box, sufficient safety guards
against accidental contact must be provided.
40
Connection of the universal radio transmitter to potential-free con-
tacts, e.g. relays, contactors, remote-control switch, motion detector, ...
Individual control of one or several radio receivers.
Up to two potential-free contacts can be connected to a universal
radio transmitter.
Depending on the potential-free contact's mode of operation (switch-
ing or inching), select mode A or B.
Mode of operation, page 30
Depending on the potential-free contact'smode of operation (switching
or inching), carry out the pin assignment.
Pinning diagram, page 31
With every signal emission, the universal radio transmitter's LED
flashes shortly.
BLUE ELECTRIC installations
The universal radio transmitter can be in-
stalled in a surface-type enclosure of a Kopp
BLUE ELECTRIC switch or pushbutton behind
the switch base.