Kopp Free-control Mode D'emploi page 37

GB
Dimming mode
Description
Application
Connectivity
DIP switch
Setting
Pinning diagram
1
Switching
operation
Dimming
operation
LED signalling
actuation point on operating rocker
Connection of the universal radio transmitter to a customary
pushbutton used for dimming control.
Individual dimming of up to two radio receiver groups.
Up to two pushbuttons for the dimming operation can be simultane-
ously connected to a universal radio transmitter.
Select mode C. To activate the mode A, remove battery for at least
30 seconds and then reinsert the battery.
Set DIP switch position 1 to ON
Set DIP switch position 2 to OFF
1
2
3
4
1
If „OFF", inch pushbutton 1x: radio signal „ON" is transmitted
1
If „ON", inch pushbutton 1 x: radio signal „OFF" is transmitted
1
Press pushbutton and keep it pressed: Dimming operation starts.
The consumer (lamp) light/dark is activated. At the desired lumi
nosity, release the pushbutton.
With every signal emission, the universal radio
transmitter's LED flashes shortly.
Connect 1st pushbutton to the input channel
1/2.
Connect 2nd pushbutton to the input channel
3/4.
37