All manuals and user guides at all-guides.com
40006058Eng.qxd
10/07/2009
Operation
1.
Open the door and load the drum with laundry. Ensure that garments do
not hinder closure of the door.
2.
Gently close the door pushing it slowly until you hear the door 'click'
shut.
3.
Turn the Programme Selector dial to select the required drying
programme (see Programme Guide).
4.
If drying synthetics, acrylics or delicate items, press the Délicats button to
reduce the heat level.
The light next to the push button will light up when the machine is in
low heat setting. To deselect in the first few minutes of the programme,
press the Délicats button, after this time reset the machine to change the
setting.
5.
Press the Début/Pause button. The dryer will start automatically and the
indicator will be continuously lit.
6.
If the door is opened during the programme to check the laundry, it is
necessary to press Début/Pause to recommence drying after the door has
been closed.
7.
When the cycle is nearing completion the machine will enter the cool
down phase, the clothes will be tumbled in cool air allowing the load to
cool down.
8.
When the programme is complete the
9.
Following the completion of the cycle the drum will rotate intermittently
to minimize creasing. This will continue until the machine is switched OFF
or the door is opened.
Cancelling and resetting the
programme
To cancel a programme press the Début/Pause button for 3 seconds. The
light will flash to indicate that it has been reset.
Départ Différé (Delay Start)
The Départ Différé function allows the user to delay the start of the drying
cycle by 3, 6 or 9 hours.
When the function is first selected the display will show a delay of 3 hours,
subsequent presses of the button will increase the delay to 6 or 9 hours.
To commence the programme press Début/Pause and the appliance will
complete the drying cycle at the end of this time. The 3, 6 or 9 hour indicator
light will flash to indicate that the start delay is in progress.
12:02
Page 15
indicator will light.
15