Removing A "Memory Stick - Sony MSAC-US2 Mode D'emploi

For Windows (continued)
4
Cancel the setting.
1 Set "Content type" to "Pictures."
2 Check "Select an action to perform" under "Actions" select
"Take no action," then click "Apply."
3 Set "Content type" to "Video files" and "Mixed content," and
repeat step 2.
4 Click "OK."
The "properties" screen closes.
5
Remove and then re-insert the "Memory Stick."
"Image Transfer" starts up automatically and the images are
automatically copied to the computer.

Removing a "Memory Stick"

– For Windows Me/2000/XP –
After the copying of image data is complete, those using Windows Me/
2000/XP must follow the procedures outlined below before removing the
"Memory Stick," and before disconnecting this unit from the computer.
1
Click the "Remove Hardware" icon located in the Task tray at
the bottom right-hand corner of the screen.
A message will appear.
2
Click on the little message [e.g., Stop USB Disk-Drive (F:)*]
that appears over the Task tray. The message will differ
slightly depending on which version of Windows you are
using.
After a little while, a message appears.
* The drive letter that appears (e.g., (F:)) will differ depending on the
configuration of the computer you are using.
22-US