Publicité
Les langues disponibles
Les langues disponibles
Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any blade assembly and before
cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1
Separate/remove all parts from each other.
2
Hand Washing: Wash the lids, pitcher, Nutri Ninja
cup, and blade assemblies in warm, soapy water. When
washing the blade assemblies, use a dish-washing
utensil with a handle to avoid direct hand contact with
blades. Handle blade assemblies with care to avoid
contact with sharp edges. Rinse and air dry thoroughly.
Dishwasher: The containers, lids, blade assemblies
and attachments are all dishwasher safe. The lids
and blade assemblies are top rack dishwasher safe.
Ensure that the blade assemblies are removed from the
containers before placing in the dishwasher.
WARNING: Handle the Stacked Blade Assembly,
and Pro Extractor Blade Assembly with care
when washing, as the blades are sharp. Contact
with the blades' edges can result in laceration.
3
Wipe the motor base clean with a damp cloth.
Please call customer service if any servicing needs to be
performed on the appliance at 1-877-646-5288.
HOW TO STORE
1
Store the Nutri Ninja
Auto-iQ
Technology upright with the blade assembly
™
inside the corresponding container with the lid secured
on top. Do not place anything on top. Store the rest of
the attachments in a safe place where they will not be
damaged and won't cause harm. Wrap the power cord
around the cord wrap on the back of the motor base.
NOTE: Do not store blended or unblended
™
ingredients in the Nutri Ninja Cup with the blade
assembly attached.
RESETTING THE MOTOR THERMOSTAT
The Nutri Ninja
Technology features a unique safety system which
prevents damage to the unit's motor and drive system
should you inadvertently overload your appliance. If
the appliance is being overloaded, the motor
will stop. Allow the appliance to cool for
approximately 15 minutes. To reset the appliance,
follow the resetting procedure below:
1
Unplug the appliance from the electrical outlet.
2
Remove and empty the container and ensure that no
food is jamming the blade assembly or attachments.
3
Allow the appliance to cool for approximately 15
minutes.
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
|
Ninja
Blender Duo
™
®
|
Ninja Blender Duo with Auto-iQ
ninjakitchen.com
with
™
14
Publicité
