Publicité
Les langues disponibles
Les langues disponibles
Assembly and Use of the Nutri Ninja
WARNING: Handle the Pro Extractor Blades
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Pro Extractor Blades Assembly from the cup upon completion of blending. Do not store
ingredients before or after blending in the Nutri Ninja cup with the blade assembly attached. Some foods
may contain active ingredients or release gases which will expand if left in a sealed container, resulting in
excessive pressure buildup that can pose a risk of injury. For storage, only use the spout lid to cover.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 2
Fig. 3
NOTE: Nutri Ninja
| Ninja
™
Technology can sense which jar is on the motor base. The
available function lights will illuminate depending on which jar
is placed on the motor base. (Fig. 1)
1
Review warning and caution statements above before
proceeding to number 2.
2
Place the motor base on a clean, dry, level surface such as a
counter or table top. Press down on the motor base to make
sure that the suction cups adhere to the counter or table top.
3
Add ingredients to the Nutri Ninja cup.
4
Place the Pro Extractor Blades Assembly onto the cup and
tightly screw it on clockwise until you have a good seal.
(Fig. 2)
5
Turn the Nutri Ninja cup upside down and place it onto the
motor base, aligning the tabs on the cup with the motor base.
Rotate the Nutri Ninja cup clockwise until it locks in place, you
will hear a click when the lock is engaged. (Fig. 3)
6
Press the power button on, and select the speed or Auto-iQ
program that suits your needs. (Fig. 4) The Auto-iQ program
will stop the appliance automatically at the end of the program.
7
To pause the appliance, press the selected speed or Auto-iQ
Assembly with care, as the blades are sharp.
®
USE
FROZEN DRINKS
SMOOTHIES
BOISSONS CONGELÉES
ON / OFF
PURÉE
MARCHE
/ARRÊT
LOW
MEDIUM
BAS
MOYEN
Blender Duo
with Auto-iQ
®
™
™
Cups
™
BLEND
MÉLANGE
ULTRA BLEND
ULTRA MÉLANGE
HIGH
PULSE
ÉLEVÉ
IMPULSION
Fig. 1
Fig. 4
program a second time. When the program is paused, the
light on the program button will flash until you press it again to
resume the rest of the program.
8
Once you have reached your desired consistency, stop the
appliance by pressing the power button and wait for the blade
to stop turning. Turn the Nutri Ninja cup counter-clockwise and
pull straight up to remove. (Fig. 5, Fig. 6)
NOTE: Do not overfill! To avoid spilling, do not add ingredients
past the "Max Liquid" line.
9
Turn the cup upright and remove the Pro Extractor Blades
Assembly by twisting the Pro Extractor Blades Assembly
counter clockwise. (Fig. 7)
10 Do not store blended contents with the Pro Extractor Blade
Assembly attached.
11 Place the spout lid onto the Nutri Ninja cup, twist to seal and
enjoy!
12 For storage, only use the spout lid to cover.
13 Be sure to store the Pro Extractor Blades Assembly attached
to an empty cup when not in use.
14 Make sure that the motor base is unplugged when not in use.
REMOVAL
Fig. 5
Fig. 6
ninjakitchen.com
Fig. 7
12
Publicité
