Suntec Wellness KLIMATRONIC CoolBreeze 4000 SV Manuel D'utilisation page 12

PARTS NAME
CAUTION
3. Do not plug the AC cord into the wall outlet outlet until fan has been
completely assembled.
4. Use power source of the fan according to electric nameplate at the back of
switch box.
HOW TO ASSEMBLE
The only tool needed for this assembly
procedure is a screw driver
1. Assembling the cross-bar feet
First of all, loosen and remove the
Four screws from bars, next cross the bar
A and bar B. Be sure to align the four holes
in the bar to the four hole on the flange at
the same time. Align the projection on the
flange with the extra hole on bar A, then
tighten the four screws and insert the base
cap down over the feet.
2. Mounting the switch box
"caution" never remove the inner pipe stopper if you remove the Inner pipe
stopper service may be necessary. Never loosen the
(1) locsen the switch box set screw by turning it to the left
(2) now place the hole in the bottom of the switch box over the inner pipe.
(3) turn the switch box set screw clockwise and tighten it firmly
1 Guard
2 Blade
3 Oscillation knob
4 Motor
5 Switch box
6 Slider switch
7 Switch box set screw
8 Cord
9 Inner pipe
10 Outer pipe
11 Base cap
12 Cross-bar feet
13 Height adjustment knob
inner pipe set screw