Nexgrill 720-1046A Guide Du Propriétaire page 10

Match Light
1. If the burner will not light after several attempts
then the burner can be match lit, before using the
match allow 5 minutes for any accumulated gas to
dissipate.
2. Clip a match on one end of the lighting rod.
3. Light match.
4. Hold lighting rod and insert lighted match right
next to the burner ports or ceramic file.
5. Push and turn the designated control knob to
6. Burner should ignite immediately.
Note: Remove all packaging, including straps, before using the grill
.
Main Burner
Main Control Knob, Label
10
Main burner
Component Identification
Side burner
Searing Side Burner