LAMBORGHINI ECO 3 Notice De Montage - Utilisation - Entretien page 28

28
IMPORTANT:
fix the deflector/electrodes set on the
nozzle holder tube in position as per
fig. D.
ECO 10
Fig. A
By removing the cover, access is gained to:
condensor-motor, control box, transformer
photoresistance, pump, electromagnetic
valve.
Fig. C
To disassemble the nozzle:
a) Undo the diffuser/electrodes unit support
screw.
Fig. C - C1
To dismount the nozzle:
a) Loosen screw 1 and extract deflector/electrode set.
b) Unscrew the nozzle with spanner/counter-spanner.
Centering tongue for vertical
position or lightly to the right
position (max 10°)
Fig. D
Fig. B
By undoing the 4 plate screws it is possible to open the
burner and thus gain access to the fan, nozzle, electrodes
and pre-heater.
Fig. D
b) Undo the nozzle with a wrench/counter-wrench
1
max 10°