Télécharger Imprimer la page

Bosch BL33 Guide D'installation page 5

Publicité

Les langues disponibles

Les langues disponibles

Dimensions for 27"
Wall-Mounted
Units
Single Oven 27"
25u2"
+ (64800)
'li
24"
_—
(10mm) (Se
a
vow
(680mm)
oaiane"
(718mm)
| (630mm)
.
pe
4
-
vont
5 , 27 1/16"
|
(738mm) |
\C7mm)
:
Z
min, 494" (121mm)
max. 38" 964mm)
23776" (606mm)
"LD 22° (559mm)
It is good practice, when oven is installed at the end of a
cabinet run, adjacent to a perpendicular wail or cabinet
door, to allow at least 1/4" space between the side of the
oven and the wall/door.
For oven support, install 2x4's extending front to back flush
with the bottom and the side of the opening. The supporting
base must be well secured to the floor/cabinet and level.
Note:
The conduit box must be installed either above or below
the unit. If the conduit box is installed below the unit, a 2"
diameter hole or space is required between the back wall
and the right rear of the 2x4 supports.
The cabinet base must be flat and capable of supporting a
weight of at least 193 Ibs (87 kg).
Double Oven 27"
2512"
(61 om an)
26/4"
«=. (680mm)
mn,
QING"
+
(630mm)
ta
518"
sta
(1299mm)
(1314mm} | |
: "ee
(1264mm)
| me.
min, 444 "(121mm
" |
937/8" (606mm)
we
.
mm
It is good practice, when oven is installed at the end of a
cabinet run, adjacent to a perpendicular wall or cabinet
door, to allow at least 1/4" space between the side of the
oven and the wall/door.
For oven support, install 2x4's extending front to back flush
with the bottom and the side of the opening. The supporting
base must be well secured to the floor/cabinet and level.
Note:
The conduit box must be located above the unit to facilitate
connecting and servicing.
The cabinet base must be flat and capable of supporting a
weight of at least 361 Ibs (164 kg).
English 3

Publicité

loading