Publicité
Les langues disponibles
Les langues disponibles
Energy-Saving Tips
You Danby appliance is designed to be highly
efficient in energy savings. Follow these
recommendations for greater efficiency.
1)
Select a thermostat setting that suits your
comfort needs and leave at that chosen setting.
2) The air filter is very efficient in removing airborne
particles. Keep the air filter clean at all times.
3) Use drapes, curtains or shades to keep direct
sunlight from penetrating and heating room, but
do not allow drapes or curtains to obstruct the air
flow around the unit.
::jnstaIIation
Installation Accessories
Fig. I
Loction: Use this portable air conditioner on a
level surface. Water may overflow if your floor
is not level and more than 3° inclination angle.
Description
Quantity
Flexible exhaust hose with collars & adapters
2/set
stretches from 17-'/2' (44.5 cm) up to 55-1/2" (141 cm)
Adjustable window/patio door slider kit
4/set
from 28" (71.1 cm) up to 80" (203 cm)
Rain Hood (For slider kit)
1 kit
see pg #7 for assembly instructions
External Water Tank Accessories Fig. Ia
Support Tray & Castors
I pc
External Tank & (2) Covers
1 Pc
Drain Hose (Not Shown)
1 PC
Air Intake Filter Basket (Not Shown)
1 pc
SPECIAL NOTE: The exhaust/window kit must be
installed at all times when the unit is operating under
AIR CONDITIONING mode.
4) Start your air conditioner before the outdoor air
becomes hot and uncomfortable. This avoids an
initial period of discomfort while the unit is cooling
off the room. Use of the automatic start/stop
programmable TIMER feature can be a major
asset in this regard if utilized to the fullest extent.
5) When outdoor temperatures are cool enough,
turn the air conditioner off and use the FAN
MODE on HIGH, MED or LOW. This circulates
indoor air, providing some cooling comfort and
utilizes less electricity.
There should be at least 11.8" (30 cm) clearance between
the unit and any other objects or building structure and
should be installed on a level surface. The unit
does
not have to be vented outside during Dehumidifying/Fan
mode operation, it is recommended however that the
hoses remain installed (on unit) during Dehumidification.
Fig. I Installation Accessories
Rain Hood Inserts (2)
Rain Hood (1)
Window Exhaust
Adacter (2)
Adjustable Window/Patio Door Slider Kit
28"
-
80"
Fig. I a External Water Tank Accessories
Support Tray & Castors (1)
External Tank
Electric Shock Hazard
To avoid the possibility of personal
injury, disconnect power to the unit
before installing or servicing.
CAUTION
Ak
To avoid installationloperation difficulties,
read these instructions thoroughly.
Flexible Exhaust Hose (2)
17-1/2'
-
55-1/2"
A
NARNING
A:
When the patio door kit is installed, it will not be
possible to lock the patio door.
THIS COULD POSE A SECURITY RISK!
Installation of a "FOOTBOLT" or "DROP BAR"
behind the door is suggested. (Available through
most local hardware stores)
-
-
A
'
!I
4
Publicité
