Danby Premiere DPACIOO6I Manuel D'utilisation page 20

6. Swing: Press the
"Swing" button to
activate the automatic air swing (oscillation)
feature. The swing symbol will appear in the
display window confirming the "swing" feature is
activated. To deactivate the "swing" feature, press
the swing button again.
7. RESET: Using a narrow object (e.g. pencil),
depress the recessed "R" button to cancel all
remote control programs. This will erase "all"
information contained within the remote control
display window (including time of day clock
setting).
8.
L. V
C & F: Press either of the temperature
buttons to select (increase I decrease) operating
temperatures. Press both buttons simultaneously
to switch from "Celsius" to "Fahrenheit".
9. SLEEP: NOTE: The sleep mode feature can only
be programmed using the hand held remote
control.
The sleep mode allows you to program a set
cooling temperature that will gradually increase
the set operating temperature "+0.5°C I 0.9° F"
(during night time sleeping hours) resulting in less
compressor running time saving energy
consumption and preventing the room from
becoming to cold during sleeping hours. See the
table below for temperature differentials during an
8 hour period.
EXAMPLE:
Time Period (Operation)
Temperature Increase
(Above Set Temperature)
1st Hour +0.5°C
2nd Hour +0.5°C
3rd Hour +0.5°C
4th Hour +0.5°C
5th Hour +0.5°C
6th Hour +0.5°C
7th Hour
+0.5°C
8th Hour Automatically returns to
Set Operating Temperature
1) Press the "Sleep" button on the remote
control.
2) The set temperature will appear in the display
window of the remote.
3) Press the
LV
temperature buttons to select
the required "set" operating temperature.
4) The unit is now programmed for sleep mode
NOTE: When turning off the main unit with the
remote control, there may be a delayed (off)
reaction (5-15 seconds) before the unit actually
stops. This is normal.
Remote Control Operating
Instructions (cont'd)
19