Publicité
Les langues disponibles
Les langues disponibles
1.9 Software Installation
System Requirements
Before installing the Adapter, your PC should meet the following:
PC with available USB V2.0/1.1* slot
Intel® Pentium®III 600Mhz or compatible processor with 128MB RAM
Windows 98SE/ME/2000/XP operating system
Minimum 15 Mbytes free disk space for installing the driver and utilities
CD-ROM drive
*When plug the device in the USB 1.1/1.0 port, the real throughput will be up to
6Mbps only when running 11Mbps or higher speed
Hardware and Software Installation
This section describes the procedures of installing the driver and utility. Follow the
instruction step by step to finish the installation. If you use Windows® 98SE/ME,
please prepare the Windows® Setup CD at hand before installing the driver;
because the system will ask you to insert the Setup CD to copy files during the
installation.
Start Windows. Insert the driver CD into your CD-Rom drive.
Go to your Windows Start menu and choose Run, type "CDRom:\USB\Vista
\Setup.exe or CDRom:\USB\XP2K\Setup.exe " in the dialog box and click OK.
Simply follow the instructions below which outline what you needto do.
Before insert the USB Dongle into USB port of your
computer, please install the Utility Program first. Make
sure that the 802.11g Wireless USB 2.0 Adapter is NOT
inserted into the USB slot.
A02-WS2
ENGLISH
Publicité
