iPower PWF3400KH Manuel Du Propriétaire Et Instructions page 12

SET UP
Assembly
1.
Take out the end cap in the frame,attach
the handle on to the frame by inserting
the clip. See Figure A.
2. Attach gun holder to handle. See Figure B.
3. Attach the hose holder to the panel.
See Figure C.
Figure A
Figure B
Figure C
FOR TECHNICAL QUESTIONS, PLEASE CALL 1-855-888-3598
4. Replace red shipping plug with the
Supplied yellow dipstick. See Figure D
5. Connect the pressure hose to the pump
outlet fitting and tighten the nut firmly by
hand, DO NOT use any tool to tighten.
See Figure E .
6. Connect the pressure hose to the
handle of the spray gun and tighten the
nut firmly by hand.
See Figure F.
10
See Figure D
Figure E
Figure F