Before The First Use - HAEGER Ultra Smoothie LQ-120.006A Mode D'emploi

English

Before the first use

• Take the appliance and accessories out the box. Remove the protective foil
or plastic from the device.
• Place the device on a flat stable surface and ensure a minimum of 10 cm.
free space around the device. This device is not suitable for installation in a
cabinet or for outside use.
• Before using your appliance for the first time, wipe off all removable parts
with a damp cloth. Never use abrasive products.
• Put the power cable into the socket (Note: Make sure the voltage which is
indicated on the device matches the local voltage before connecting the
device). The blue light around the 3 function buttons will flashing up. After the
glass jug is fixed to motor housing base unit, the light will stop flashing and
turns fixed.
• The blender is equipped with a security function. The blender can only be
switched on if the glass jar is locked in the base unit correctly.
Assembly instructions
Assembling and disassembling the blending jug
1. Place the cutting blade assembly into the blade base.
2. Place the blade base with inserted blade assembly on the blending glass
jug from the bottom and tighten it firmly in clockwise direction.
3. Place the measuring cup into the opening in the blender lid and turn it
clockwise to secure it in the lid.
4. When you have placed all the necessary ingredients into the blending jug,
close it with the assembled lid. The lid needs to be properly pushed down
along the entire perimeter so that it adheres well to the edge of the
blending jug.
5. When disassembling the blending jug, proceed in the reverse sequence.
Attaching the blending jug to the motor unit and their removal
On to the motor unit place the blending jug and turn it clockwise all the way
so that it is secured on the motor unit. When the blending jug is correctly
attached to the motor unit, it is not possible to freely lift it off the motor unit.
Attention:
The safety mechanism will prevent the appliance from being started unless the
blending jar is properly attached to the motor unit.
4 Instructions for use