Perel SSE025 Notice D'emploi page 3

5. Override Instructions
For your convenience we have engineered a manual override system in case you forget or misplace your code
combination.
• Remove the small plate below the knob.
• Insert the key into the keyhole and turn it in a clockwise direction.
• Turn the knob towards the right.
6. Replacing the Batteries
WARNING: If the batteries are low, the red indicator will warn you immediately. Test the batteries by entering your
code combination. Open the door. If the batteries are low, the red indicator will light. The indicator will not
light if the batteries are in order.
• Open the safe and push the battery cover on the back of the door.
• Take out the old batteries and replace them with 4 AA (1.5V R06) alkaline batteries.
• Reprogram the code (see "4. Programming the Code").
7. Installing the Safe
CAUTION: Install the safe in a horizontal position.
To reduce the risk of theft, the safe can be secured to the floor, wall or in a cupboard. For your convenience, there
are 2 holes (Ø 8mm). Fix the safe by the supplied expansion bolts.
8. Technical Specifications
Power Supply
Dimensions
Weight
The information in this manual is subject to change without prior notice.
SSE025
4 x 1.5V AA batteries (incl.)
external: 250 x 330 x 250mm
internal: 240 x 340 x 200mm
packing: 280 x 390 x 295mm
net: 10 kg
gross: 11 kg
- 3 -
PEREL