Publicité
Les langues disponibles
Les langues disponibles
EN
ATTENTION
Always read instructions before use
electric tool.
For correct and safety utilization:
Work area must be clean and
organized all the time.
Avoid electric tool contact with
humidity. Don´t use in presence of
flammable liquids or gases.
Keep it away of children´s.
Stow tools that you don´t need.
Must use glasses and protection
mask, if release operation dust.
Never force tool. Learn and
attended all specification for get
all benefits of this toll always with
maximum security.
All the time use the correct tool for
right effect.
Use appropriate clothes, avoid
large clothes and jewels prevent
accidents.
Tie your air if you have big.
If work outside and humidity is high,
is advisable use rubber gloves and
anti slip shoes.
Never transport electric tool by the
cable.
Always secure the work piece in
order to be hands free.
TOOL ATTENTIONS
Keep screens, orifices and engine
box clear.
Wipe them with a soft and clean
cloth by applying gentle air
pressure.
10
DOUBLE INSULATION
This tool is double insulated - all
metal parts are isolated from the
mains.
Importantly, the double insulation
does not replace the normal safety
precautions.
ON/OFF (FIG.2)
1 - To start impact drill: Connect
power. Press the button nº1. The
rotation will increase more than
pressing the button.
2 – For continuous operation, press
the button nº1 continuously at the
desired speed.
PROGRESSION |
REGRESSION (FIG.2)
ATTENTION!
Don't use this function when
impact drill be running, can be
high dangerous. Always check the
direction of rotation before starting
to drill.
1. Use the button to progression /
regression of direction. Right "R"
clockwise.
To the left "L" in the opposite
direction clockwise.
SPEED LIMIT (FIG.3)
ATTENTION!
Do not use the drill in a low speed
for a long period of time.
1 Turn the knob to the "+" in the
sense of clockwise to increase
the speed and the sign "-" in the
opposite direction clockwise to
decrease.
In uses long lasting watch the
temperature of the machine, never
that the body because it may be hot,
use the handle.
SELECT A DRILL (FIG.4)
WARNING!
Do not tamper with the selection
of the drill while the drill is in
operation.
Publicité
