Logitech ZONE VIBE WIRELESS Manuel D'utilisation page 11

CHARGING
To conserve battery life, headphones
automatically power off after 30 minutes
without usage.
Sleep timer can be adjusted in Logi Tune.
The LED light on the headphones will blink
slowly in RED when the battery is lower
than 10%.
Charging via USB cable
1 Plug one end of the cable to the USB-C port on
the bottom of the earcup and the other end into
the USB-C charging port on your computer
2 The LED light will start breathing white when
charging
3 The LED light will turn solid white when fully
charged
– 2 hours will fully charge the battery
– 5 minutes will give you 1 hour of playback
Note:
Battery life may vary based on user, environment,
and computing conditions
4 The headphones can be used with the receiver and
Bluetooth paired while charging
LOGI TUNE
Logi Tune helps boost your headphones performance
with periodic software and firmware updates
It is recommended to update both your headphones
and receiver To do so, download Logi Tune from
www logitech com/tune
Logi Tune
www.logitech.com/tune
11 English