Publicité
Les langues disponibles
Les langues disponibles
Indicator Panel Description
1 .
Hot water indicator light – When illuminated, indicates that the dispenser is
heating water.
2 .
Cold water indicator light – When illuminated, indicates that the dispenser is
cooling water.
3 .
Bottle indicator light – When flashing, indicates that your water bottle is empty and
needs to be replaced with a new water bottle.
Product Dimensions
Height
Width
105.1 cm (41.4 in.)
31.1 cm (12.2 in.)
Operational Specifications
CAUTION:
This unit dispenses water at temperatures that can cause severe burns. Avoid direct contact with hot
water. Keep children and pets away from unit while dispensing. Never allow children to dispense hot
water without proper and direct supervision. Unplug unit to prevent unsupervised use by children.
Temperature
Dispensing Cold
37°-50°F / 3°-10°C
Water
Dispensing Hot
176°–198°F / 80°–92°C
Water
Installation
1 . Determine Installation Location
A .
Place the dispenser upright.
B .
Locate the dispenser on a hard and level surface in a cool shaded
location near a grounded wall outlet.
NOTICE:
Do NOT plug in the power cord until the entire installation
section is completed.
C .
Position the back of the dispenser no closer than 20 cm (8 in.) from a
wall and permit free airflow between the wall and water dispenser.
2 . Install the Drip Tray and Grid
A .
Unwrap the drip tray (8) from the packaging material and slide it onto
the dispenser until it is secure in place.
Depth
39.6 cm (15.6 in.)
Tank Capacity
3.6 L
1 L
5
1
2
Flow Rate
35 mL per second /
1.5 L per hour
35 mL per second /
4.5 L per hour
3
8
Publicité
