Publicité
Les langues disponibles
Les langues disponibles
Safety Information
WARNING:
To reduce risk of injury and property damage, you must read this entire guide before assembling,
installing and operating the dispenser.
WARNING:
This product dispenses water at very high temperatures. Failure to use properly can cause personal
injury. When operating this dispenser, always exercise basic safety precautions, including the following:
Prior to use, this dispenser must be properly assembled and installed in accordance with this
•
manual.
For indoor use only. Keep the water dispenser in a dry place away from direct sunlight. Do NOT use
•
outdoors.
•
Install and use only on a hard, flat and level surface.
Do NOT place the water dispenser in an enclosed space or cabinet.
•
•
Do NOT operate the dispenser in the presence of explosive fumes.
•
Use only properly grounded outlets.
Do not use an extension cord.
•
•
Always grasp the plug and pull straight out from the outlet. Never unplug by pulling on the power
cord.
Do NOT use the dispenser if the cord becomes frayed or otherwise damaged. If the supply cord is
•
damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
•
To protect against electric shock, do NOT immerse cord, plug, or any other part of the dispenser in
water or other liquids.
•
Do not use this dispenser with water that is microbiologically unsafe or of unknown quality.
•
Water dispenser is compatible with 3- or 5-gallon (12- or 19- liter) water bottles.
Clean up all water spills after loading or unloading water bottles from the dispenser.
•
•
Ensure the water dispenser is unplugged prior to cleaning.
•
Never allow children to dispense hot water without proper and direct supervision. Unplug the unit to
prevent unsupervised use by children.
•
Service should be performed only by a certified technician.
•
The appliance must not be cleaned by a water jet and is not suitable for installation in an area where
a water jet could be used.
WARNING:
Keep ventilation openings, in the dispenser enclosure or in the built-in structure, clear of obstruction.
WARNING:
Do not use mechanical devices or other means to accelerate the defrosting process, other than those
recommended by the manufacturer.
•
This dispenser should work under environment of temperatures from 4°C~40°C (39°F~104°F) and
humidity ≤90%.
•
Never turn the dispenser upside down or lean it more than 45°.
After turning the dispenser off, allow the dispenser to sit idle for 3 minutes before turning on again.
•
3
Publicité
