Panasonic KX-TGA106C Manuel D'installation page 4

TGA106C(e).fm Page 4 Friday, February 6, 2009 3:00 PM
Registering a handset to the base unit
1
Handset:
Lift the handset and press {OFF}.
2
Base unit:
Press and hold {LOCATOR} for about 5 seconds until the registration
tone sounds.
L If all registered handsets start ringing, press the same button to
stop. Then repeat from step 1.
L The next step must be completed within 90 seconds.
3
Handset:
Place the handset on the charger.
L Continue the operation even when the handset display shows
"Registering".
4
With the handset still on the charger, wait until a long beep sounds
and w stops flashing.
Note:
L If an error tone sounds, or if w is still flashing, register the handset
according to the base unit's operating instructions.
Display language
1
{MENU} i {#}{1}{1}{0}
2
{V}/{^}: Select the desired setting.
3
Press the middle soft key to save. i {OFF}
4