Publicité
Les langues disponibles
Les langues disponibles
SySTeM SeTTInGS
13. System settings
To access the system settings, ensure that the radio is switched on.
Then hold the ON/OFF button down for 5 seconds.
5s
13.1 Standby screen
Select a brightness setting for the display that is to be used in standby mode.
13.2 Time settings
The radio allows the time to be displayed in 12-hour (am/pm) or 24-hour format.
13.3 Screen display
Three different presentations of the display content are supported. Here, you can switch between
naVIGaTe
complete text display, image and text display and full image with subtitles.
13.4 language selection
One of the available system languages can be selected here.
13.5 SW version
The radio's current software version is displayed.
enTeR
13.6 factory settings
This function allows you to reset your radio to the factory settings on the software side. Confirm the
prompt with "yeS" to start the process.
note
Resetting to the factory default settings can remedy some problems and malfunctions.
However, all settings made previously, such as equaliser presets, station presets and network profiles,
will be permanently deleted.
14
Publicité
